All Epicus-TS Devices are Wifi compatible but may require some configurations before they will connect. While many configurations are plug and play, Wifi configurations will require some user input first. Please follow the below steps for configuring Wifi on your EpicusTS Device
To do this, you will need to open the file in a text editor such as Microsoft Word or Notepad
Repalce the highlighted text with your Wifi Name (SSID) and your Wifi Password (Password)
Save your Wifi Configuration file to a flash drive. Be sure that the file name is setting.xml with no other characters in the name. If the file name does not match exactly, the configuration will NOT work!
Plug in the flash drive into the USB port located on the cable whip of the Epicus-TS Device
The scanner will display updates as it detects the USB Drive
Once the setting.xml file is detected, the device will import the settings
Once complete, the screen will display "Import Setup Complete". Once this message appears, your settings have been applied and you can remove the flash drive from the device